1100 Tub Grinder

General

Length (operating): 56’3″ (17.14 m)
Length (transport): 37’2″ (11.33 m)
Height (transport): 12’9″ (3.88 m)
Width: 11’2″ (3.4 m)

Gross weight NCL: 48,630 lbs. (22,058 kg)
Axle weight NCL: 34,830 lbs. (15,800 kg)
Tongue weight NCL: 13,770 lbs. (6,245 kg)
Gross weight WCL (optional): 59,920 lbs. (27,180 kg)
Axle weight WCL (optional): 40,540 lbs. (18,390 kg)
Tongue weight WCL (optional): 19,380 lbs. (8,790 kg)

Engine: CAT
Horsepower: 800 HP (596 kW)

Fuel capacity: 160 gallons (605 litres)
Hydraulic oil capacity NCL: 120 gallons (454 litres)
Hydraulic oil capacity WCL: 205 gallons (776 litres)

Screen Area: 2,174 sq in (14,026 sq cm)

Magnetized end pulley

11-HP (8.2kW) air compressor

Dust suppression system

Morbark reversing fan

Tub

Tub has 9′ (2.74 m) diameter at inside base, 62″ (157.48 cm) deep walls constructed of 3/8″ (9.52 mm) reinforced steel plate, and floor constructed of 1/2″ (1.27 cm) thick wear-resistant steel, supported by 14 roller guides carried on 1-1/2″ (3.81 cm) diameter shafts. Hydraulic full tilt tub for easy access to hammermill, with hydraulically powered variable RPM forward and reverse tub control; MICS (Morbark Integrated Control System) tub controlled with automatic reversing tub, sensor system. Tub cover for debris containment. Morbark Integrated Control System located in the instrument panel.

Hammermill and Screens

24″ x 52″ (60.96 cm x 132.08 cm) Hammermill system constructed of heavy-duty 16-1/2″ (41.91 cm) diameter laser-cut rotor, (13) 1-3/4″ (4.44 cm) thick 2-piece laser-cut rotor plates to ensure precision and enforce steel strength. The plates are keyed on a 5-7/8″ (14.92 cm) diameter rotor shaft with 3-15/16″ (10 cm) bearings direct driven at engine RPM and (8) 2″ (5.08 cm) hammer retaining rods.

Complete with (24) 2″ (5.08 cm) balanced forged steel hard-surfaced hammers and (24) 2-15/16″ (7.46 cm) replaceable inserts with nuts and bolts.

1″ (2.54 cm) thick wear form steel heavy-duty screens

Discharge System

Two 14″ (35.56 cm) diameter augers discharge onto a 36″ (91.44 cm) belt conveyor
Discharge height: 15′ (4.57 m)
Hydraulic fold for transport
Front hydraulic stabilizers and manual outriggers