2600 Wood Hog Horizontal Grinder

General

Length wheeled: 33’8″ (10.26 m)
Height wheeled: 11’6″ (3.5 m)
Width wheeled: 7’10” (2.39 m)

Length tracked: 30′ (9.1 m)
Height tracked: 11’6″ (3.5 m)
Width tracked: 8’6″ (2.6 m)

Gross weight wheeled: 30,660 lbs. (13,910 kg)
Axle weight: 23,920 lbs. (10,850 kg)
Tongue weight: 6,720 lbs. (3,050 kg)

Gross weight tracked: 32,000 lbs. (14,515 kg)

Engine: CAT
Horsepower: 275 HP to 300 HP (205 kW to 224 kW)

Fuel capacity (tank): 90 gallons (340 litres)
Hydraulic oil capacity: 92 gallons (348 litres)

Screen Area: 2,585 sq in (16,677 sq cm)

Brakes: air

Towing arrangement: fifth wheel/pintle hitch

Dust suppression system

Manually operated debris containment door

Remote control with tethered remote back‑up system

Magnetized end pulley with collecting slide tray for ferrous metal removal

Air compressor with 11-HP (8.2 kW) motor

Break-away torque limiter

Infeed System

Infeed opening: 34″ x 57″ (86.4 cm x 114.8 cm)

Variable speed infeed system consists of one 22″ (55.8 cm) diameter top compression feed roll with internal drive and a 57″ wide x 9’7″ (144.8 cm x 2.9 m) long live floor with four strands of WDH-110 chain in a staggered configuration.

Hammermill and Grates

23-¾” x 53-1/8″ (60.32 cm x 134.9 cm) hammermill system constructed of heavy-duty 16″ diameter rotor, (23) 1-1/8″ (2.85 cm) thick two-piece laser-cut rotor plates to ensure precision and enforce steel strength. The plates are keyed on a 4-1/2″ (11.43 cm) diameter shaft with two 3-7/16″ (8.73 cm) bearings and eight 1-¼” (3.17 cm) hammer retaining rods. Hammermill pattern consists of (22) 1-¼” (3.17 cm) forged steel heavy-duty hammers, and (22) 2-1/16″ (5.24 cm) wide double-edged replaceable inserts and 22 rakers.