2355 Flail Chiparvestor

General

Length: 54’3″ (16.54 m)
Height: 13’8″ (4.16 m)
Width: 11’11” (3.63 m)
Gross weight: 115,200 lbs. (52,253 kg)

Engine: CAT
Horsepower: Up to 1,490 HP (1,111 kW)

Tri-axle trailer: 75,000 lb. (34,019 kg) suspension

Drive (flail): hydraulic
Drive (chipper): belt

Fuel capacity (tank): 500 gallons (1,892 litres)
Hydraulic oil capacity (flail): 200 gallons (757 litres)
Hydraulic oil capacity (feed system and loader): 300 gallons (1,135 litres)

Reversing fan

11-HP (8.2 kW) air compressor

Remote control

Brakes: air

Cab and Loader

Cab offers operator a deluxe 6-way adjustable seat, joy stick controls, combination air conditioner/heater, and emergency shut-down system. Along with complete engine gauge panel for both power units located in cab. Hydraulic tilt-down cab for transport. Morbark 500 knuckleboom loader, 23’ (7 m) reach, 270º swing and 360º continuous rotation grapple. Lift capacity of 17,200 lb. (7,800 kg) at 10’ (3.05 m)

Flail

Infeed opening 23” x 55” (58.42 cm x 139.7 cm)

Three top feed rollers mounted on yoke assemblies

Five stationary bottom feed rollers

Dual horizontal chain flails with patented segmented drums are equipped with eight flail chain rods.

Discharge system consisting of 60-1/2” wide x 23’ (1.54 m x 7.01 m) long telescoping drag chain conveyor with hydraulic drive.

Air curtain

Chipper

75” (190.5 cm) diameter chipper disc with three or four knife configuration.

Built-in dirt separator, debris is bottom discharged into dual 12” (30.48 cm) diameter twig augers which discharge directly into the 23’ (7 m) refuse drag chain.

Hydraulic swivel/telescoping discharge spout.