1200XL Tub Grinder

General

Length (transport): 38’2″ (11.63 m)
Length (operating): 57’3″ (17.45 m)
Height (transport): 12’10” (3.9 m)
Width: 11’11” (3.63 m)

Gross weight NCL: 55,620 lbs. (25,230 kg)
Axle weight NCL: 43,840 lbs. (19,885 kg)
Tongue weight NCL: 11,810 lbs. (5,360 kg)

Gross weight WCL (optional): 72,920 lbs. (33,075 kg)
Axle weight WCL (optional): 51,760 lbs. (23,480 kg)
Tongue weight WCL (optional): 21,160 lbs. (9,600 kg)

Engine: CAT
Horsepower: 800 HP to 875 HP (596 kW to 652 kW)

Fuel capacity (tank) : 300 gallons (1,135 litres)
Hydraulic oil capacity: 205 gallons (776 litres)

Screen Area: 2,480 sq in (16,000 sq cm)

11-HP (8.2 kW) air compressor

Dust suppression system

Magnetized end pulley

Morbark reversing fan

Tub

Tub has 9′ (2.74 m) diameter at inside base, 62″ (157.48 cm) deep walls, and floor constructed of 1/2″ (1.27 cm) thick T-1 wear-resistant steel, supported by (16) roller guides carried on 35mm diameter shafts.

Hydraulic full-tilt tub for easy access to hammermill, with hydraulically powered variable RPM forward and reverse tub control; MICS (Morbark Integrated Control System) tub controlled with automatic reversing tub, sensor system.

Tub cover for debris containment

Hammermill and Screens

27″ x 51-1/4″ (65.58 cm x 130.17 cm) Hammermill system constructed of a heavy-duty 16-1/2″ (41.91 cm) diameter laser cut rotor, (13) 1-3/4″ (4.44 cm), thick 2-piece laser-cut rotor plates to ensure precision and enforce steel strength. The plates are keyed on a 5-7/8″ (14.92 cm) diameter rotor shaft with 3-15/16″ (10 cm) bearings direct driven at engine RPM and (8) 2″ (5.08 cm) hammer retaining rods.

Complete with (24) 2″ (5.08 cm) balanced hard-surfaced hammers and (24) 3-1/16″ (7.77 cm) forged double-edged replaceable inserts.

1″ thick wear form steel heavy-duty screens