1300B Tub Grinder

General

Length (transport): 45′ (13.72 m)
Length (operating): 60’10” (18.54 m)
Height (transport): 13’6″ (4.11 m)
Width: 11’11” (3.63 m)

Gross weight NCL: 74,580 lbs. (33,830 kg)
Axle weight NCL: 50,520 lbs. (22,915 kg)
Tongue weight NCL: 24,060 lbs. (10,915 kg)

Gross weight WCL (optional): 86,520 lbs. (39,245 kg)
Axle weight WCL (optional): 56,000 lbs. (25,400 kg)
Tongue weight WCL (optional): 30,520 lbs. (13,845 kg)

Engine: CAT
Horsepower: 1,050 HP (783 kW)

Fuel capacity (tank): 505 gallons (1,912 litres)
Hydraulic oil capacity: 205 gallons (776 litres)

Screen Area: 3,730 sq in (24, 064 sq cm)

Remote control

Magnetized end pulley with collecting slide tray for ferrous metal extraction

Air compressor

Morbark automatic reversing fan

Dust suppression system

Externally adjustable break-away torque limiter

Tub

Tub has 10′ (3.04 m) diameter at inside base, 57″ (144.78 cm) deep walls constructed of 3/8″ (9.52 mm) structural steel plate and floor constructed of 1/2″ (12.77 mm) thick T-1 wear-resistant steel, supported by (16) roller guides carried on 1-1/2″ (3.81 cm) diameter shaft. Hydraulic full-tilt tub for easy access to hammermill, with hydraulically powered variable RPM forward and reverse MICS (Morbark Integrated Control System) tub control. Tub cover for debris containment.

Hammermill and Screens

31″ x 64″ (78.74 cm x 162.56 cm) hammermill system constructed of heavy-duty 20″ (50.8 cm) diameter rotor, (13) 1-7/8″ (4.76 cm) thick 2-piece laser-cut rotor plates to ensure precision and enforce steel strength. The plates are keyed on a 7″ (17.78 cm) diameter shaft with 4-7/16″ (11.27 cm) bearings and (8) 2-1/4″ (5.71 cm) hammer retaining rods. 1″ (2.54 cm) thick steel heavy-duty split-screens.