2755 Flail Chiparvestor

General

Length: 55’ (16.76 m)
Height: 13’6’’ (4.11 m)
Width: 11’11” (3.63 m)

Gross weight: 120,960 lbs. (54,866 kg)
Tri- axle trailer: 75,000 lb. (34,020 kg) suspension

Engine: CAT
Horsepower: up to 1,490 HP (1,111 kW)

Drive (flail):  hydraulic
Drive (chipper): belt

Fuel capacity (tank): 500 gallons (1,892 litres)
Hydraulic oil capacity (feed systems and loader): 300 gallons (1,135 litres)
Hydraulic oil capacity (flail): 200 gallons (757 litres)

11-HP (8.2 kW) air compressor

Reversing fan

Cab and Loader

Cab offers operator a deluxe 6-way adjustable seat, joy stick controls, combination air conditioner/heater, and emergency shut-down system. Along with, complete engine gauge panel for both power units located in cab. Hydraulic tilt-down cab for transport. Morbark 500 knuckleboom loader, 23’ (7 m) reach, 270º swing and 360º continuous rotation grapple. Lift capacity of 17,200 lb. (7,800 kg) at 10’ (3.05 m)

Flail

Infeed opening: 27” x 55” (68.58 cm x 139.7 cm)

Three top feed rollers mounted on yoke assemblies

Five stationary bottom feed rollers

Dual horizontal chain flails with patented segmented drums are equipped with eight flail chain rods

Discharge system consisting of 60-1/2” (1.54 m) wide x 23’ (7 m) long telescoping drag chain conveyor with hydraulic drive

Air curtain

Chipper

27” (68.58 cm) diameter chipping capacity

83” (210.82 cm) diameter chipper disc with a three, four or six-knife configuration

Chip sizes: 5/8”, 3/4”, 7/8”, or 1” (15.88 mm, 19 mm, 22.22 mm, 25.4 mm)

Dirt separator, bottom discharges onto 12” (30.48 cm) diameter twig augers

Hydraulic swivel/telescoping discharge spout

Options

• Four- or six-knife chipper disc
• Third flail drum
• Push ram discharge in lieu of standard discharge
• ESPAR heating system for cold weather start
• Electric power option
• Foot pedal loader swing for knuckleboom loader