4600XL Wood Hog Horizontal Grinder

General

Length (transport) wheeled: 42′ (12.8 m)
Length (operating) wheeled: 63′ (19.2 m)
Height wheeled: 13’3″ (4.04 m)
Height (operating) wheeled: 16’9″ (5.1 m)
Width wheeled: 10’11” (3.33 m)

Length (transport) tracked: 45′ (13.72 m)
Length (operating) tracked: 61’10” (18.85 m)
Height tracked: 11’11” (3.63 m)
Height (operating) tracked: 16’4″ (4.98 m)
Width tracked: 11’3″ (3.43 m)

Gross weight wheeled: 75,660 lbs. (34,320 kg)
Axle weight: 51,600 lbs. (23,405 kg)
Tongue weight: 24,060 lbs. (10,915 kg)

Gross weight tracked: 88,640 lbs. (40,206 kg)

Engine: CAT
Horsepower: 1050 HP (783 kW)

Fuel capacity (tank) wheeled: 370 gallons (1,400 litres)
Hydraulic oil capacity wheeled: 187 gallons (708 litres)

Fuel capacity (tank) tracked: 340 gallons (1,287 litres)
Hydraulic oil capacity tracked: 267 gallons (1,010 litres)

Screen Area: 4,414 sq in (28,477 sq cm)

Brakes: air

Towing arrangement:fifth wheel

Dust suppression system

Hydraulically operated debris containment door

Remote control with tethered back-up system

Automatic reversing fan system

Externally adjustable break-away torque limiter

Magnetized end pulley with collecting slide tray for ferrous metal removal

11 HP (8.2 kW) air compressor with lockable enclosure

Infeed System

Infeed opening: 60″ x 46″ (152.4 cm x 116.8 cm)

Variable speed infeed system consists of one 33″ (83.82 cm) diameter top compression feed roll with internal drive and an 15’5″ long x 60 3/8″ (4.7 m x 153 cm) wide live floor equipped with four strands of WDH-120 chain in a staggered configuration with direct drive.

Hammermill and Grates

36″ x 61-3/8″ (91.4 cm x 155.9 cm) hammermill system constructed of heavy-duty 25-½” (64.7 cm) diameter rotor, (17) 1-1/8″ (44 cm) thick two-piece laser-cut rotor plates to ensure precision and enforce steel strength. The plates are keyed on an 8-3/8″ (21.27 cm) diameter shaft with two 5-3/16″ (13.17 cm) bearings and eight 2-¼” (5.7 cm) hammer retaining rods. Hammermill pattern consists of (18) 2″ (5.08 cm) balanced forged steel heavy-duty hammers, (18) 3-1/16″ (7.7 cm) wide double-edged replaceable inserts and 18 rakers.

Discharge System

Discharge system consists of a hydraulically driven, horizontal 48″ wide x 22′ (122 cm x 6.7 m) long aggregate belly belt conveyor discharging onto a 36″ (91.44 cm) wide stacking conveyor with hydraulic fold for transport.