Model 30 Chiparvestor Whole Tree Chipper

30 RXL

General

Chipping capacity: 30″ (76.2 cm)
Length: 41′ (12.5 m)
Height: 13’6″ (4.11 m)
Width: 11′ (3.35 m)
Gross weight (approx.): 82,000 lbs. (37,195 kg)
Horsepower: up to 1,200 HP (894.84 kW)
Engine: CAT
Tandem axle trailer: 50,000 lb. (22,679 kg) suspension
Fuel capacity (tank): 400 gal (1,514.16 L)
Hydraulic oil capacity: 300 gallons (1,135.62 L)
Knives (3): 23″ x 5″ x ½” (58.42 cm x 12.7 cm x 1.27 cm)
Chip sizes: 5/8″, ¾”, 7/8″, 1″, 1 ¼”, 2″ (15.88 mm, 19 mm, 22.22 mm, 25.4 mm, 31.75 mm, 50.8 mm)

Equipment Highlights

• 83″ (210.82 cm) diameter x 5″ (12.7 cm) thick three-knife chipper disc with LH rotation
• Hydraulic chipper hood for easy knife access
• 30″ (76.2 cm) x 10′ (3.05 m) CAT chain infeed bed
• Three-wheel hydraulic feed system
• Two 13″ (33 cm) x 25 ¾” (65.4 cm) side feed wheels and one 22 ¼” (56.52 cm) x 68″ (172.72 cm) top feed wheel
• Wireless remote control with tethered back-up
• Enclosed weatherized operator’s cab is mounted on rubber shock absorbers and tilts hydraulically for transport and includes combination air conditioner/heater and six-way adjustable seat and joystick controls
• Morbark 1000 knuckleboom loader, 25′ (7.62 m)reach, 210º swing and by-pass grapple, with lift capacity of 20,000 lbs. (9,071.85 kg) at 10′ (3.05 m)
• Dirt separator with deflector
• Hydraulic swivel/telescoping discharge spout
• Reversing fan

Options

• PT Tech hydraulic clutch
• Four-knife chipper disc
• Espar heating system for cold-weather start
• Electric power
• Light package
• 11-HP (8.2 kW) air compressor

30 WCL Track

General

Chipping capacity: 30″ (76.2 cm)
Length: 32’11” (10 m)
Height: 11’11” (3.63 m)
Width: 11’10” (3.61 m)
Gross weight  (approx.): 94,000 lbs. (42,638 kg)
Horsepower: up to 1,200 HP (894.84 kW)
Engine: CAT
Fuel capacity (tank): 400 gal (1,514.16 L)
Hydraulic oil capacity: 300 gallons (1,135.62 L)
Knives (3): 23″ x 5″ x ½” (58.42 cm x 12.7 cm x 1.27 cm)
Chip sizes: 5/8″, ¾”, 7/8″, 1″, 1 ¼”, 2″ (15.88 mm, 19 mm, 22.22 mm, 25.4 mm, 31.75 mm, 50.8 mm)

Equipment Highlights

• 83″ (210.82 cm) diameter x 5″ (12.7 cm) thick three-knife chipper disc with LH rotation
• Hydraulic chipper hood for easy knife access
• Four-wheel hydraulic feed wheel compression system
• Heavy-duty feed works drive
• Electric warning horns activated from cab and/or ground position on both sides of machine
• Enclosed weatherized operator’s cab lowers hydraulically for transport and includes combination air conditioner/heater and six-way adjustable seat and joystick controls
• Morbark 500 knuckleboom loader, 23′ (7 m) reach, 180º swing and by-pass grapple, lift capacity of 17,200 lbs. (6,894.6 kg) at 10′ (3.05 m)
• Reversing Fan

Options

• Air Compressor
• Halogen light package
• ESPAR heating system for cold-weather start
• 270º hydraulic powered swivel end discharge spout
• CAT 330L undercarriage with 700mm triple grouser pads with ground clearance of 20″(50.8 cm)
• Infeed extension to hydraulic fold up 90º for transport